Nominal power, torques and input speeds:
The nominal power and torques in the sample depend on the input speed. For a service factor of FS=1.0, a constant unidirectional load is effective. If the rotation direction is changed every minute under full load, the nominal power and torque are only 70% of the values in the sample. The nominal torque is also applicable when the input speed is 3% lower than the synchronous speed.

Thermal rating:
The thermal rating needs to be checked for every gear unit.

Surface and corrosion protection:
If required, all gear units can provide surface and corrosion protection measures to cope with extremely humid and corrosive working environments.

Weight:
Note that the weight in the sample refers to the weight of the gear unit without lubricating oil. You can find the corresponding amount of lubricating oil for each model gear unit according to the data on the sample.

Supply of cooling air:
For gear units equipped with a cooling fan on the input shaft, it is necessary to leave enough space in the axial and radial directions to ensure cooling air circulation.

International certification:
Our reducer products meet the technical requirements of ISO international standards and GB China standards.

Steel frame:
Our company can provide the overall assembly components of the gear unit installed on the steel frame (swing base or base frame).

Sealability:
The gear unit can provide different sealing configurations for HSS and LSS.

1. Double seal (standard)
2. Radial labyrinth seal
3. Contactless seal

1. Cooling fan
2. Shrink disc
3. With bell-shaped support + fan
4. Backstop
5. Motor bracket and pulley input
6. High-speed shaft (HSS) elastic coupling
7. Low-speed shaft (LSS) gear coupling
8. HSS and LSS coupling shield
9. Torque arm
10. With cooling lubrication system
11. Oil drain valve
12. Oil heater
13. Other sealing structures
14. Temperature sensor PT100
15. Vibration sensor: Installed on the gear unit housing to detect the vibration of the gear unit